Notifications
Clear all

Show your enclosures  

Page 2 / 8
  RSS
ruzeki
(@ruzeki)
New Member
RE: Show your enclosures

Thanks to the Prusa Mini's Low footprint I can use the TV Cabinet. 

 

 

 

Tour Video here: https://photos.app.goo.gl/qHtsJH9mqjxGS2wg8

The venting is used to keep the emissions out.

This post was modified 4 years ago by ruzeki
Posted : 24/02/2020 11:23 am
Scott Frazer
(@scott-frazer)
Active Member
RE: Show your enclosures

@bradmcgonigle

Re: The drawers

You can print them at 90% on the x/y axis, but it does mess with the magnet and screw holes and 5 across won't be such a perfect fit as the original

Posted : 25/02/2020 1:21 am
digbat
(@digbat)
Eminent Member
RE: Show your enclosures

@matteo-cristini

Ah, yes, I see that..... now. I started from recent posts and didn't check the breadcrumbs. I'm very impressed with the mini enclosures on show, neat tidy, and fit home decors. I'll quietly leave the room lol.

Cheers

digbat

TANSTAAFL

Posted : 25/02/2020 8:12 am
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Show your enclosures

@neil-t

Oh don't worry, I just felt the need to tell you!

Your enclosure is quite impressive, too - people in the MK3 forum will appreciate it for sure 😀

Posted : 25/02/2020 8:31 am
TickTock
(@ticktock)
Estimable Member
RE: Show your enclosures

I went cheap:    $14 dust cover.

You can even print in it.

 

 

Posted : 28/02/2020 1:35 am
Knickohr
(@knickohr)
Member Moderator
RE: Show your enclosures

Oldies, but goldies 😉

https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-improvements-archive/yac-yet-another-cabinet-housing/

Thomas

Posted : 28/02/2020 9:29 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Show your enclosures

not everyone's...

https://grabcad.com/library/enlosure-for-prusa-i3-printer-1

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 28/02/2020 11:15 am
Christopher Masto
(@christopher-masto)
Active Member
RE: Show your enclosures

A nice addition to an existing IKEA cabinet.

Posted : 04/03/2020 2:08 am
Matteo Cristini
(@matteo-cristini)
Reputable Member
RE: Show your enclosures

@knickohr

@karl-herbert

A friendly reminder that this thread is meant for Prusa Mini enclosures, not MK3s 🙂

Posted : 05/03/2020 5:47 pm
Knickohr
(@knickohr)
Member Moderator
RE: Show your enclosures

You only have to use shorter extrusions 😉

Thomas

Posted : 06/03/2020 12:14 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Show your enclosures

@matteo-cristini

Thanks for the hint. The Mini would be happy to live in a larger house 🙂 

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 07/03/2020 7:20 pm
Crawlerin
(@crawlerin)
Prominent Member
RE: Show your enclosures

Just finished putting LACK v1 together. There may be few things to add - like make some kind of spool holder outside or hanging from ceiling, print or make frames to put around plexi to fill gaps, maybe stack the third table once I finish sewin masks, and get paving stone to put some mass to it - which will come later because all but essential stores are closed.

Posted : 02/04/2020 3:54 pm
Ciotog
(@ciotog)
New Member
RE: Show your enclosures

Still very much a work in progress. I've been building it out of things around the house and garage. Still getting used to having a printer of my own, this is the first one I've ever had.

Posted : 21/04/2020 1:31 pm
Owens2303
(@owens2303)
Eminent Member
RE: Show your enclosures

Just Purchase this server cabinet for mini printer it has removable sides and front, waiting on printer now only just ordered recently and don't expect to August so it gives me plenty of time to get ready and read up on the Prusa Mini and 3D printing as I am a newbie and this is my first printer.

Posted : 23/04/2020 11:26 pm
AZ_TIM liked
AZ_TIM
(@az_tim)
Trusted Member
RE: Show your enclosures

@mowens

I like it - can you give a make and model for it? I'm looking for an enclosure.

 

thanks!

I'm not a mad scientist, I'm an angry engineer in training.

Posted : 24/04/2020 3:04 pm
GrimmWinters
(@grimmwinters)
Trusted Member
RE: Show your enclosures

@mowens

is this in even closely airtight? all the server racks i found were pretty open. but it looks awesome 😀

Posted : 24/04/2020 3:07 pm
Owens2303
(@owens2303)
Eminent Member
RE: Show your enclosures

@tlovern

Got from eBay Australia, model number, 9U 9RU 19" Wall Mount Rack Cabinet 508mm Deep WC9U. $190 plus $25 freight.

Posted : 24/04/2020 8:31 pm
AZ_TIM liked
AZ_TIM
(@az_tim)
Trusted Member
RE: Show your enclosures

@mowens

thanks!

I'm not a mad scientist, I'm an angry engineer in training.

Posted : 24/04/2020 9:57 pm
ChiefGeek
(@chiefgeek)
New Member
RE: Show your enclosures

@strandedbandit

Definitely not, see all those air slots. Servers like airflow. That said, there's multiple reasons to use an enclosure. Pets, children, curious people, dust to name some that come to mind. Also despite not being airtight, it'll still help with drafts and even retain a bit of the temp to help with printing. And if you plan to put in a exhaust, you'll still need to let air in somehow. 

 

PS: My first Prusa is on order and it's my first post/comment here, so (in my best Dr Nick voice) Hi Everybody! 

Posted : 27/04/2020 5:26 am
AZ_TIM
(@az_tim)
Trusted Member
RE: Show your enclosures

@mowens

So did you remove the cage from the inside, or is there enough room for the printer with the rack supports in place? I'm looking at getting a similar unit, and it comes with a power strip that mounts to the internal rack supports.  If you need to remove them for the printer to fit, then I will get one without the power strip and simply use a different one outside the case.

I'm not a mad scientist, I'm an angry engineer in training.

Posted : 27/04/2020 7:21 pm
Page 2 / 8
Share: