Notifications
Clear all

Put a Insulation below my heatbed  

  RSS
oopsitsaflame
(@oopsitsaflame)
Active Member
Put a Insulation below my heatbed

Warmup time to 100 deg down one minute from nearly 6 to nearly 5.

I hope its also using less power on printjobs now.

Had to use slightly longer screws for the bed because the pad was to thick.

I think this should be standard for printers

This topic was modified 1 year ago by oopsitsaflame
Posted : 04/04/2020 2:31 pm
ChiefGeek and Nox liked
Share: