Notifications
Clear all

Prusa Mini in OpenHab Smart Home  

  RSS
Dahuafschmied
(@dahuafschmied)
Active Member
Prusa Mini in OpenHab Smart Home

I just want to say thank you Prusa Team

The mini Firmware allows me to integrate the printer to my home automation for monitoring.

I just wait for more to come....

Prusa Mini - FW:4.2.1

Napsal : 25/03/2020 9:59 am
Nox se líbí
Oxygen
(@oxygen)
Reputable Member
RE: Prusa Mini in OpenHab Smart Home

Could you please share how you managed that 🙂 

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Napsal : 25/03/2020 12:27 pm
Dahuafschmied
(@dahuafschmied)
Active Member
Topic starter answered:
RE: Prusa Mini in OpenHab Smart Home

@oxygen

 

short version:
htttp://[ip address of the mini]/api/telemetry reports all the information in JSON format.
with the http binding in openhab you can grab the data and save it to openhab items.
gcode commands are not working at the moment
FW 4.0.5 RC1

 

long version:
perhaps i will make a manual if there is a official Prusa API Documentation available. I am sure the data format will change a bit during firmware/webinterface development.

 

Prusa Mini - FW:4.2.1

Napsal : 25/03/2020 3:22 pm
omari a Oxygen se líbí
Oxygen
(@oxygen)
Reputable Member
RE: Prusa Mini in OpenHab Smart Home

that is all I need -- Thank you

Mini with FW:4.4.1 + SuperPINDA + Bondtech Heatbreak + PC4-M8 couplers + 1 piece boden

Napsal : 25/03/2020 6:34 pm
Nox
 Nox
(@nox)
Member
RE: Prusa Mini in OpenHab Smart Home

Oh, thank you for that great idea! 
I'll use that in Home Assistant as soon as I get my Mini 👍

Napsal : 09/04/2020 7:08 am
vrnagy
(@vrnagy)
New Member
RE: Prusa Mini in OpenHab Smart Home

@nox

If You want I can send You my config for HA

Napsal : 24/09/2020 9:07 pm
June S.
(@june-s)
New Member
RE: Prusa Mini in OpenHab Smart Home

@vrnagy

I would love to see your HA config, I was going to explore submitting an official integration.

Napsal : 22/06/2021 7:11 pm
vrnagy
(@vrnagy)
New Member
RE: Prusa Mini in OpenHab Smart Home

@june-s

Actually I made a custom component, You can install it via HACS, or simly copy to custom_components folder. The integration can be set via the UI.

You can found the component here: https://github.com/vrnagy/hass-prusa-mini

Napsal : 22/06/2021 7:17 pm
landmaj
(@landmaj)
New Member
RE: Prusa Mini in OpenHab Smart Home

Seems like more people are working on it, yesterday I created my own integration. 🙂 The difference being it should be compatible with the official OctoPrint plugin, and so it works with threedy custom card.

 

Integration: https://github.com/landmaj/prusa_connect

Custom card: https://github.com/dangreco/threedy

 

threedy

 

Napsal : 24/06/2021 8:17 am
cwbullet
(@cwbullet)
Member
RE: Prusa Mini in OpenHab Smart Home

This is a fascinating topic and a great addition to my home workshop monitoring project.  

--------------------
Chuck H
3D Printer Review Blog

Napsal : 24/06/2021 10:08 am
jcjames_13009
(@jcjames_13009)
Estimable Member
RE: Prusa Mini in OpenHab Smart Home

htttp://[ip address of the mini]/api/telemetry

Hi

Seems that this command is not working anymore (as least for me) since 4.4.0 firmware version update

Is someone has an info or solution to correct this issue?

Thansk

JC

Prusa MINI+ at home / Prusa MK3S+ in the Fab Lab / You can have a look at my designs here printables.com

Napsal : 03/12/2022 6:08 pm
Helmar
(@helmar)
Member
RE: Prusa Mini in OpenHab Smart Home

Hi Thanks for your tip.

In which intervall are you graping the data?
btw: I think the API URL in the meantime changed to http://192.168.1.xxx/api/v1/status

Napsal : 20/09/2023 10:08 am
Share: