Prusaslicer with Ender-3 V2 Extruder stops feeding
Clear all

Prusaslicer with Ender-3 V2 Extruder stops feeding  

New Member
Prusaslicer with Ender-3 V2 Extruder stops feeding

On layer 3 my extruder stops feeding it will retracted but not go foreword after layer 3

If i use a different slicer it works all the way to a finished part.

It is not a hardware problem

I tried the new version of Prusaslicer and V2.3.2

I have Jyers build v1.3.4 and running OctoPrint V1.6.1



Posted : 29/07/2021 12:37 am
Illustrious Member
Verify extruder move type

Make sure your startup gcode sends M82/M83 commands for absolute or relative extruder movement that matches your PrusaSlicer settings.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 29/07/2021 1:07 pm
Illustrious Member

Did this solve the problem?  

Chuck H
3D Printer Review Blog...
Posted : 31/07/2021 1:41 am
New Member
Topic starter answered:
RE: fixed

thank you for your help got it fixed

Posted : 31/07/2021 5:00 pm