PrusaSlicer craches when setting bed size to 3000x2000mm
 

PrusaSlicer craches when setting bed size to 3000x2000mm  

  RSS
jonas-3
(@jonas-3)
Active Member

And why would I want to this you might ask? Well thats because I have a big printer (extruder mounted to a robot)

What happens is that it simply craches without warning.

Does anybody have an explanation for this?

Posted : 03/01/2020 11:58 am
bobstro
(@bobstro)
Illustrious Member

Any error message or dump when it crashes? 

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 03/01/2020 3:05 pm
jonas-3
(@jonas-3)
Active Member
Posted by: @bobstro

Any error message or dump when it crashes? 

No nothing at all. It just shuts down a few seconds after I press ok 

Posted : 03/01/2020 3:14 pm
bobstro
(@bobstro)
Illustrious Member
Posted by: @jonas-3

No nothing at all. It just shuts down a few seconds after I press ok 

If you think it's a bug, you should open an issue on the PrusaSlicer Github page so the developers can give it a look. Be prepared to provide some meaningful information though. Your OS, version, hardware configuration (incl. graphics) and at least the version of PrusaSlicer you're using are needed to even start to guess at what the problem might be.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 03/01/2020 4:19 pm
Sembazuru
(@sembazuru)
Prominent Member

I would also assume that the devs would want your printer profile. In fact, if I was submitting this bug I'd attach the .3mf project file that is confirmed to crash (as this will include all three profiles being used and the 3D object). If the crash you are experiencing is happening on a proprietary object, create or find a freely distributable object that shows the same issue and submit that.

See my (limited) designs on:
PrusaPrinters - https://www.prusaprinters.org/social/1448-sembazuru/prints
Thingiverse - https://www.thingiverse.com/Sembazuru/designs...
Posted : 04/01/2020 5:48 pm
jonas-3
(@jonas-3)
Active Member

Thank you all. I will open an issue on github

Posted : 09/01/2020 12:43 pm
Share:

Please Login or Register