Notifications
Clear all
Printing area PrusaSlicer 2.30-rc2 Win64
Posted : 26/12/2020 11:49 am
Topic starter
answered:
RE: Printing area PrusaSlicer 2.30-rc2 Win64
I've printed this bed full of cookie cutters taking care that the skirt is inside the printing area. After printing I've recognized that two of them are cut off. I've measured the position of the skirt on the left and right area of the build plate. The offset from the edge on the right side is 1.5mm which seems to be what I have also seen within the software. But on the left side the software offsets the skirt to 5.80mm measuring from the printbed edge. So there seems to be something wrong regarding the printbed size wihtin the release.
This post was modified 3 years ago by Cat3D
Posted : 26/12/2020 11:57 am