Different top layer patterns for different items on same build
 
Notifications
Clear all

Different top layer patterns for different items on same build  

  RSS
RedDawg
(@reddawg)
Reputable Member
Different top layer patterns for different items on same build

I would like to specify different top layer patterns for different objects on the build plate, not different instances of a given object. It seems I can modify many of the parameters for a given object, including layer thickness, fill %, etc,. but not top (or bottom FTM) layer patterns, or at least I don't find it in the various item editing drop-down menus. Have I missed it? Possible? If not, it should be. Off to github?

Hear ye, Hear ye! Step right up folks and get your Government salvation here! Less than $.002 per word! Amazon.com/dp/B0B8XMMFP4

Posted : 30/08/2021 2:43 pm
Neophyl
(@neophyl)
Illustrious Member

I think you have missed it.  Top Infill pattern and bottom infill pattern are both available.  Click Add Settings>Infill.  The ones listed in the sections above Add Settings are the common basic ones(as decided by Prusa).  The Add Settings option gives many more.

Posted : 30/08/2021 3:02 pm
You liked
Swiss_Cheese
(@swiss_cheese)
Noble Member

I'll add to that, you need to be in expert mode to see those settings.

The Filament Whisperer

Posted : 30/08/2021 5:36 pm
RedDawg
(@reddawg)
Reputable Member
Topic starter answered:
Yep, missed it

I'm ALWAYS in Expert Mode, although I won't claim to be an expert (yet)! Thought I had been through all of the drop-down options, but I either missed it or didn't go deep enough (it's buried pretty deep). Thanks for the guidance.

Hear ye, Hear ye! Step right up folks and get your Government salvation here! Less than $.002 per word! Amazon.com/dp/B0B8XMMFP4

Posted : 30/08/2021 11:47 pm
Share: