I recently received my Prusa SL1 and completed the calibration and then moved on to updating firmware. It shipped with 1.2.3 and I updated to 1.3.0 via USB and am not able to update to any others. I get the "Update Failed" error message.
Here is a link to the log file: https://www.dropbox.com/s/pzidjkfrb12c7mt/log.CZPX4919X009XC02885.2021-01-16_22-13-40.txt.xz?dl=0
Any help is appreciated.
Kevin
I would post this one on the GitHUB: https://github.com/prusa3d/Prusa-Firmware-SL1
I recently received my Prusa SL1 and completed the calibration and then moved on to updating firmware. It shipped with 1.2.3 and I updated to 1.3.0 via USB and am not able to update to any others. I get the "Update Failed" error message.
Here is a link to the log file: https://www.dropbox.com/s/pzidjkfrb12c7mt/log.CZPX4919X009XC02885.2021-01-16_22-13-40.txt.xz?dl=0
Any help is appreciated.
Kevin
I had the same problem going to the latest update. However, I loaded the updates from the 'older versions page' dont include the latest version, 1.4.2 new certificate..
I put all these files on USB stick and updated in stages. 1.3.0 then 1.4.1 and lastly 1.4.2 which worked. The 1.4.2 new certificate file produces error on my machine.
All best
Steve