Notifications
Clear all

One Way Valve for filament (check valve)  

  RSS
Printschnitzel.at
(@printschnitzel-at)
Active Member
One Way Valve for filament (check valve)

Hey there!

I have made a check valve for filament with the balls of an 608 bearing.
You can use this for your MMU setup.
https://www.thingiverse.com/thing:3314526

Cheers,
Richard

Posted : 27/12/2018 11:13 am
Mucaro liked
richard.l
(@richard-l)
Member Moderator
Re: One Way Valve for filament (check valve)

I'm confused. What is this for exactly?

Posted : 27/12/2018 5:56 pm
Martin_au
(@martin_au)
Reputable Member
Re: One Way Valve for filament (check valve)

It's a really nifty way to stop filament moving back to the spool when used with an MMU. It would replace the dual lever system Prusa uses.

Posted : 28/12/2018 4:26 am
Printschnitzel.at
(@printschnitzel-at)
Active Member
Topic starter answered:
Re: One Way Valve for filament (check valve)

As Martin said, but this is meant to be a concept. You can use the idea for your own filament spool system. I am working on some compact and airtight solutions for MMU where I use this and it's working perfectly.

Posted : 08/01/2019 12:09 pm
CybrSage
(@cybrsage)
Honorable Member
Re: One Way Valve for filament (check valve)

What happens to the unloaded filament if it has nowhere to go?

Posted : 11/01/2019 12:27 am
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: One Way Valve for filament (check valve)

could you change the file to have a solid top, no insertion hole, no screw hole, then print 3/4 height, pause, insert ball, resume and print top, covering the ball and preventing escape?

Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 11/01/2019 12:39 am
Mucaro liked
Nikolai
(@nikolai)
Noble Member
Re: One Way Valve for filament (check valve)


could you change the file to have a solid top, no insertion hole, no screw hole, then print 3/4 height, pause, insert ball, resume and print top, covering the ball and preventing escape?

Why don't print the solid plastic ball in place and have a solid top without pausing anything? 😉
With MMU you could even use different plastic for the ball 😈

Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram

Posted : 11/01/2019 1:13 am
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: One Way Valve for filament (check valve)

I think surface detail may disadvantage that option.... however, a roller, might work!
Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 11/01/2019 1:18 am
Mucaro liked
Nikolai
(@nikolai)
Noble Member
Re: One Way Valve for filament (check valve)


I think surface detail may disadvantage that option.... however, a roller, might work!

Go higher in resolution for this layers and the surface might be even beneficial for this purpose. But we think in the same direction 🙂

Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram

Posted : 11/01/2019 1:48 am
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: One Way Valve for filament (check valve)

:~)

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 11/01/2019 1:58 am
Printschnitzel.at
(@printschnitzel-at)
Active Member
Topic starter answered:
Re: One Way Valve for filament (check valve)


could you change the file to have a solid top, no insertion hole, no screw hole, then print 3/4 height, pause, insert ball, resume and print top, covering the ball and preventing escape?

Joan

Yes, I'll do that 🙂

Posted : 11/01/2019 8:24 am
Mucaro liked
Printschnitzel.at
(@printschnitzel-at)
Active Member
Topic starter answered:
Re: One Way Valve for filament (check valve)


What happens to the unloaded filament if it has nowhere to go?

This does not take care about the unloaded filament.
If you want to use this you'll need some buffer for the filament.
It is meant to be a concept.

I am working on a perfect filament buffer, but it is not ready for publishing yet 😉
It needs to be an airtight system and easy to handle.....

Posted : 11/01/2019 8:13 pm
Danistra
(@danistra)
Active Member
Re: One Way Valve for filament (check valve)


I am working on a perfect filament buffer, but it is not ready for publishing yet 😉
It needs to be an airtight system and easy to handle.....

wow 😯 ... really looking forward to see the final version. Very impressive. I need this :D. The Prusa solution needs to much space to handle all the filaments and this seems to be very promising to solve that on a reliable way.

Posted : 14/01/2019 7:40 pm
Printschnitzel.at
(@printschnitzel-at)
Active Member
Topic starter answered:
Re: One Way Valve for filament (check valve)

There is a new but not final version:
https://www.thingiverse.com/thing:3314526

Posted : 09/02/2019 11:41 am
michael.r52
(@michael-r52)
Eminent Member
Re: One Way Valve for filament (check valve)

Here another similar:
https://shop.prusa3d.com/forum/user-mods-octoprint-enclosures-nozzles--f57/one-way-l-bracket-t28249.html#p132486

Posted : 08/03/2019 11:07 pm
Printschnitzel.at
(@printschnitzel-at)
Active Member
Topic starter answered:
RE: One Way Valve for filament (check valve)

Teaser of things to come 😏

Attachment removed
Attachment removed
This post was modified 5 years ago 3 times by Printschnitzel.at
Posted : 10/05/2019 6:47 am
Share: