Round Objects in flexible filament  

  RSS
Florian
(@florian)
Active Member

I Have to Print this Thing 16 times. 

But I can't geht it to print the Filament is a Inoflex 60 from BASF. 

If I print it with the round part up the overhang from the round part is ugly.

If I print the round part down it is not printing at all. 

I can't use support in the same Material because it is flexible and I will not get it off.

What could I do?

Posted : 20/03/2020 3:24 pm
bobstro
(@bobstro)
Illustrious Member

Can you redesign the part to use a chamfer instead of a fillet for the side printed on the bed?

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 20/03/2020 3:53 pm
John
 John
(@john-6)
Reputable Member

I had an object not dissimilar. Try adding a 45 fillet to the underside of the dome. And flip the print 180 deg

i3 Mk3 [aug 2018]...
Posted : 21/03/2020 8:05 am
Share:

Please Login or Register