Assigning different support materials  

  RSS
moritz.skowronski
(@moritz-skowronski)
New Member

Hi,

I want to print several models at the same time. All of them need support material. However, I want to print one of them with soluble support and the others with regular filament. Is there a way to specify the support filament for each model?

 

Thanks,

Moritz

Posted : 30/01/2020 12:44 pm
wgiefing
(@werner)
Active Member

servus, I've a similar situation as Moritz mentioned.

I've a mk3s and mmu2s,  slicer 2.2. alpha and latest firmware in both.

I'd like to e.g. set filament / extruder 5 to solutable filament - PVA. But I can't force the support material to use extruder 5. it is always the same extruder used as the object/model is using. = support material is using the "object extruder" = same filament

any ideas or have a overseen a feature

regards

werner

 

besten Dank / kind regards
MK3S & MMU2S, Enter 3 Pro...
Posted : 03/02/2020 7:01 pm
wgiefing
(@werner)
Active Member

PS: I've found the "print setting - multiple extruder" but selecting the support material / interface  , I'll loose the wipe tower.

besten Dank / kind regards
MK3S & MMU2S, Enter 3 Pro...
Posted : 03/02/2020 7:49 pm
Share:

Please Login or Register