PrusaSlicer creates G-code with wrong nozzle temperature target
 
Notifications
Clear all

PrusaSlicer creates G-code with wrong nozzle temperature target  

  RSS
thomas.l15
(@thomas-l15)
New Member
PrusaSlicer creates G-code with wrong nozzle temperature target

I am using PrusaSlicer 2.1.1+ and trying to print a file using Prusa PLA.  The target temperature in Slicer is 215 degrees for the nozzle but when I load the file in the printer and try to print, the target temperature is 170 degrees.  How do I correct this?

TL

...
Posted : 22/03/2020 3:17 pm
bobstro
(@bobstro)
Illustrious Member
RE: PrusaSlicer creates G-code with wrong nozzle temperature target

Just wait. Give it 10 minutes. It's a 2 step warmup procedure to reduce oozing during mesh bed leveling. The warmup will take a few minutes on the first print of the day, but will be faster for subsequent prints.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 22/03/2020 4:14 pm
Share: