Notifications
Clear all

MK3S MMU2S reboots after heating to temperature  

  RSS
vinomarky
(@vinomarky)
New Member
MK3S MMU2S reboots after heating to temperature

Hi,

I'm trying to print a file that I used PrusaSlicer to generate the GCode with, but everytime I load it the printer goes through it's calibartions and warming up phases and just when it reaches temperature it reboots without any error message / sound / blinking lights

 

Running firmware 3.8.1-2869

Any suggestions of what to try next?

 

Thanks

Posted : 10/03/2020 10:11 am
vinomarky
(@vinomarky)
New Member
Topic starter answered:
RE: MK3S MMU2S reboots after heating to temperature

Edit: It may be pertinent that I am making my first attempt at printing with soluble support layers, and attempted to accomplish this by access the multiple extruder option, and setting support layers to Filament 2, with everything else Filament 1

Posted : 10/03/2020 10:18 am
vintagepc
(@vintagepc)
RE: MK3S MMU2S reboots after heating to temperature

Check your FINDA and IR sensor calibration. there's a known bug that causes a reset if you try to print with the extruder reading 1 and the FINDA reading 0.

 

 

Posted : 10/03/2020 12:53 pm
vinomarky
(@vinomarky)
New Member
Topic starter answered:
RE: MK3S MMU2S reboots after heating to temperature

@vintagepc

Thanks - I recalibrated the FINDA and it's now working again

Posted : 11/03/2020 10:22 am
vintagepc liked
Share: