extrudor stops extruding filament halfway through a longer printing session.
 

extrudor stops extruding filament halfway through a longer printing session.  

  RSS
Jasper Lisabeth
(@jasper-lisabeth)
New Member

The extrudor stops extruding filament about halfway through a longer printing session.

the piece i want to print has a printing time of 5h18. The first hour or two seem to go normal. when i come check the print about halfway through, i see the printer following the right track to print this piece, only it doesn't extrude the filament anymore.

I've tried printing the same part twice, 2 weeks apart, and i see that the printer stops extruding the filament at the exact same layer.

The day before, i had a smaller piece to print, with a printing time of 30min. This seems to go normal, only longer prints of multiple hours are giving me problems.

 

Posted : 09/04/2021 12:20 pm
bobstro
(@bobstro)
Illustrious Member

What layer height are you using? A higher layer height can be easier to print. Please save your current  3MF project file, zip it up, and attach it to a reply here so we can see your part & settings and give better recommendations.

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 09/04/2021 3:18 pm
Jasper Lisabeth
(@jasper-lisabeth)
New Member

I'm using a layer height of 0.15.

I'll attach the zipped file of the piece i want to print with its settings.

R25 351 R90 P

Posted : 12/04/2021 7:26 am
Share:

Please Login or Register