PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc
 
Notifications
Clear all

[Solved] PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc  

Page 3 / 3
  RSS
SENIORPAPOU
(@seniorpapou)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

@antimix

Bonjour, mon anglais étant very bad, ....pensez-vous mettre au point le dribbling compatible avec la dernière version de prusaslicer ??

Il me manque énormément lorsque je "travaille" en multi-matériaux.   Les filaments ressortent avec une extrémité de deux centimètres de longueur.... à l'avance Merci.

Cordialement

Posted : 09/02/2021 4:50 pm
Snag3d
(@snag3d)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

@papou @antimix

im also really keen for this, id do it if i could haha, hopefully he isn't far off posting it

Posted : 12/02/2021 9:37 am
Kayl
 Kayl
(@kayl)
New Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

Hello guys,

I wanted to test this dribbling version with Prusa slicer 2.3.0, so I built the version dribbling_2.3.0.zip

Enjoy

@antimix Great job, many thanks.

@papou J'espère que cette version comblera tes attentes.

@shane-6 You can test this version

 

Happy printing

Posted : 12/02/2021 11:09 pm
ANTALIFE and Michael liked
Snag3d
(@snag3d)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

@kayl

thank you so much! no more issues when changing from 2.3 to 2.2 dribbling very happy 🙂

ill going to send you a private message just a heads up

Posted : 14/02/2021 1:46 am
SENIORPAPOU
(@seniorpapou)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

@kayl

Merci beaucoup.

Je termine ma "mutation" mk3s/MMU2s vers Mk3s+/MMu2s et je teste au plus vite.

Bonne journée

Posted : 14/02/2021 6:55 am
mc_ott
(@mc_ott)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

@shane-6

Just to verify, did you mean changing from dribbling 2.2 by antimix to dribbling 2.3 by kayl ?

 

Posted : 01/03/2021 3:30 pm
Pierre badel
(@pierre-badel)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

hello Kayl

is it possible to share sources, so that it can be compiled on other platforms?
thank you in advance

 

Pierre

Posted : 03/03/2021 8:45 pm
Kayl
 Kayl
(@kayl)
New Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

@pierre-badel

Of course, sources are here : https://github.com/kayl669/PrusaSlicer

Enjoy

Posted : 03/03/2021 9:37 pm
Pierre badel
(@pierre-badel)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

thank you very much!
easy compilation under ubuntu 20.10 (with options -DSLIC3R_WX_STABLE=1 -DSLIC3R_GTK=3 -DSLIC3R_FHS=1)

Posted : 09/03/2021 6:06 pm
SENIORPAPOU
(@seniorpapou)
Active Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

Bonjour, @kayl

est-il possible d'ajouter une séquence "g-code  end" semblable pour la mmu2s utilisée en single afin d'obtenir une bonne sortie de filament en fin de traitement, sans avoir une prolongation de plusieurs centimètres ?? En supposant avoir effectué un retour en position repos (hors objet).

Merci

Posted : 30/03/2021 1:02 pm
Snag3d
(@snag3d)
Active Member
Update please 😉

 

Posted by: @kayl

Hello guys,

I wanted to test this dribbling version with Prusa slicer 2.3.0, so I built the version dribbling_2.3.0.zip

Enjoy

@antimix Great job, many thanks.

@papou J'espère que cette version comblera tes attentes.

@shane-6 You can test this version

 

Happy printing

Anychance of another update 🙂 

Went to try do it myslef spent 3 days trying to figure it out with no luck and feeling more lost then when I started haha. Need a person with your mad skills to implement this in new versions 😉 

Posted : 03/10/2021 10:52 am
Kayl
 Kayl
(@kayl)
New Member
Dribbling 2.4.0-alpha3

Update done here : https://github.com/kayl669/PrusaSlicer/releases/download/dribbling_2.4.0-alpha3/dribbling_2.4.0-alpha3.zip

Posted : 04/10/2021 7:53 am
Antimix liked
Sajo
 Sajo
(@sajo)
New Member
Stringing solved

Thank you, this solved my problems with stringing.

Posted : 16/10/2021 11:41 am
isometricbacon
(@isometricbacon)
New Member
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

 

Posted by: @kayl

Update done here : https://github.com/kayl669/PrusaSlicer/releases/download/dribbling_2.4.0-alpha3/dribbling_2.4.0-alpha3.zip

Cheers for keeping this updated!.

I'm having a strange issue however,

When slicing a print with this variant of PrusaSlicer, when the toolchange occurs, it will attempt to switch filaments before retraction - i.e. it hasn't pulled the previous one out of the extruder, the selector will move, with the old filament still in there - and cause a jam. It will merrily keep going on its way, and then start pushing out the next filament into mid air for awhile before realising it never reaches the extruder and stopping.

I sliced the same file back in regular PrusaSlicer and didn't have this occur, but are back to my 'stringing gumming everything up' prints. Not sure if it's something conflicting with the print settings I used?

Posted : 13/11/2021 10:47 pm
Antimix
(@antimix)
Reputable Member
Topic starter answered:
RE: PrusaSlicer "DRIBBLING VERSION" for MMU2 updated to latest PrusaSlicer 2.1.0-rc

I would like to thank kayl for taking care of Dribbling 🙂.
Unfortunately in those times, I had no spare time to devote to it, but I am happy that the OpenSource world it is live, and we all are like a team. Feel free to continue to develop and improve the dribbling version, since for what I have seen recently PRUSA is focussing on XL and "real" multiple extruders, so Dribbling is still the best tools for standard MMU2 multi material.

Posted by: @kayl

Update done here : https://github.com/kayl669/PrusaSlicer/releases/download/dribbling_2.4.0-alpha3/dribbling_2.4.0-alpha3.zip

 

Posted : 25/11/2021 5:55 pm
Page 3 / 3
Share: