MMU2 - Real Multi Material  

Page 6 / 6
  RSS
Antimix
(@antimix)
Estimable Member

Hi all,

PrusaSlicer 2.1.1 - Dribbling V.B01 is finally out 😀 

You can find at https://github.com/antimix/PrusaSlicer/releases/tag/dribbling_2.1.1-B01

You can download the executables or compile yourself.

This new version has a lot of capabilities to handle different materials.  It does not need any script, it directly handle the special functionalities by generating appropriate GCODE.
See info at the github release page.

Happy printing.

 

This post was modified 6 months ago by Antimix
Posted : 07/02/2020 7:16 pm
nimaim
(@nimaim)
Trusted Member

@nikolai.r are you still using this for 3.9.0 and PrusaSlicer 2.2.0? Just curious if they fixed diff temperatures of filament for multi material at all.

This post was modified 2 months ago 2 times by nimaim
Posted : 23/05/2020 1:52 pm
nikolai.r
(@nikolai-r)
Noble Member

@nimaim

Yes, my script is still in use. There are no changes in PS in regards to that.  

3.9.0 introduced filament cutting. Some people reported bend filament and loose blades. That’s why I prefer to stay for the time being on my 3.8.1 firmware. It’s working pretty stable for me and most important I know the most common issues and how to solve them. 

But I’m pretty sure there will be 3.9.1/3.9.2 and adjusted blade cutter designs in the future. So always keep an eye on it.

Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram...
Posted : 23/05/2020 4:43 pm
nimaim
(@nimaim)
Trusted Member
Posted by: @nikolai-r

@nimaim

Yes, my script is still in use. There are no changes in PS in regards to that.  

3.9.0 introduced filament cutting. Some people reported bend filament and loose blades. That’s why I prefer to stay for the time being on my 3.8.1 firmware. It’s working pretty stable for me and most important I know the most common issues and how to solve them. 

But I’m pretty sure there will be 3.9.1/3.9.2 and adjusted blade cutter designs in the future. So always keep an eye on it.

Thanks for the reply! Yes, 3.9.0 also addressed new parts like the blade cover and a deeper blade position on the selector. Being the first release of the feature, you are probably right that it may take a minor revision or two to have it working for everyone. I updated, but it's easy enough to go back so we'll see what happens. 

Posted : 23/05/2020 7:10 pm
nikolai.r
(@nikolai-r)
Noble Member

@nimaim

Thanks for the hint with the new parts. Most likely there is no reason to go back. For somebody who is just starting with MMU2 or struggling with the old one anyway, I would recommend to install the most recent version. So far there was always a step forward in revisions. None is issue free. The only difference is known vs unknown. 

Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram...
Posted : 23/05/2020 7:16 pm
Karl Herbert
(@karl-herbert)
Famed Member

@antimix

👍 good work!

I consider the integration into the prusaslicer an interesting possibility. however, i don't want to burden my computer with further installations like visual studio or other stuff and therefore i ask if there is an already compiled version dribbling_v2.2.0 available for download.

Thanks!

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 23/05/2020 11:31 pm
Page 6 / 6
Share:

Please Login or Register