Finda shows n/a and load fails  

  RSS
dave.r
(@dave-r)
New Member

Hi Guys

 

My finda shows n/a in the support menu every other load and the load fails. This is happening alot. I have tried to tune the finda and the ir but it keeps happening no matter what filament i use. Any suggestions?

...
Posted : 12/08/2020 6:15 pm
Karl Herbert
(@karl-herbert)
Famed Member
Posted by: @dave-r

Hi Guys

 

My finda shows n/a in the support menu every other load and the load fails. This is happening alot. I have tried to tune the finda and the ir but it keeps happening no matter what filament i use. Any suggestions?

n/a means that the printer does not recognize the sensor. There is an article about this in the Prusa Knowledge Base:

https://help.prusa3d.com/en/article/finda-setup-and-troubleshooting_2250

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 12/08/2020 6:48 pm
Share:

Please Login or Register