Working (Octopi) Image needed for Rapsberry Pi Zero W // Prusa-Print Image (Prusaprint.zip) CRC failure - File corrupt
 
Notifications
Clear all

Working (Octopi) Image needed for Rapsberry Pi Zero W // Prusa-Print Image (Prusaprint.zip) CRC failure - File corrupt  

  RSS
Austria777
(@austria777)
Active Member
Working (Octopi) Image needed for Rapsberry Pi Zero W // Prusa-Print Image (Prusaprint.zip) CRC failure - File corrupt

Hi all, I want to install a Raspberry Pi Zero W on my MK3S+. I received already my RPB Zero W, and i tried to download the "unsupported" image Prusaprint.zip from the prusa homepage. Any file i try to download fails when I want to open it. there is a CRC error, so the file seems to be corrupt.

Is anyone able to share a working image for the Raspberry Pi Zero W, so that i can try to setup my solution?

Many thanks in advance.

Werner

Posted : 01/12/2021 2:18 pm
Diem
 Diem
(@diem)
Noble Member

The latest version (this month) is available from:

https://octoprint.org/download/

Cheerio,

Posted : 01/12/2021 10:25 pm
Austria777
(@austria777)
Active Member
Topic starter answered:
RE: Working (Octopi) Image needed for Rapsberry Pi Zero W // Prusa-Print Image (Prusaprint.zip) CRC failure - File corrupt

Hi Diem,

thanks for your feedback. I already found the download on the Octoprint homepage, but there they recommend not using a Pi Zero W.

I wanted to get the pre-configured Image from Prusa. They did a image with all the parameters correctly set already. It's called Prusaprint.zip and you can find it on the Prusa Homepage. That's the file or Image which i try to get. 

Only problem, the prusaprint.zip file you can download from the prusa homepage seems to be corrupt, as i cant open it with any ZIP, RAR file as it always ends with an CRC error during extraction. Maybe someone can share this file with me?

 

BR.

Werner

Posted : 02/12/2021 12:03 pm
Neophyl
(@neophyl)
Famed Member
RE: Working (Octopi) Image needed for Rapsberry Pi Zero W // Prusa-Print Image (Prusaprint.zip) CRC failure - File corrupt

But that version will be massively out of date and wouldn't be recommended to use.

Posted : 02/12/2021 12:11 pm
Austria777
(@austria777)
Active Member
Topic starter answered:
RE: Working (Octopi) Image needed for Rapsberry Pi Zero W // Prusa-Print Image (Prusaprint.zip) CRC failure - File corrupt

Hi Neophyl,

so you recommend, to make a image from scratch i supose 😉

BR.

Werner

Posted : 02/12/2021 12:21 pm
Diem
 Diem
(@diem)
Noble Member

thanks for your feedback. I already found the download on the Octoprint homepage, but there they recommend not using a Pi Zero W.

When the Prusa-Print image was created a Pi Zero W was OK for the task but Octoprint has developed dramatically since then and the Zero W is no longer enough.  But they do say the Pi Zero 2 W is more than capable.

Installing from scratch is painless.

Cheerio,

Posted : 02/12/2021 4:48 pm
Share: