Notifications
Clear all

Rpi Zero & Octopi working!!!!  

Page 7 / 7
  RSS
DevDoc
(@devdoc)
Estimable Member
Re: Rpi Zero & Octopi working!!!!


I should have probably included that these were both connected to the PI headers on the board, and not through the USB plug.

That is one difference for sure. I have never connected it directly yet.

Posted : 25/01/2018 8:37 pm
Paul Meyer
(@paul-meyer)
Honorable Member
Re: Rpi Zero & Octopi working!!!!


I should have probably included that these were both connected to the PI headers on the board, and not through the USB plug.

I would not think this would make a significant difference, although the direct headers might have a slight advantage over the USB.

Both the USB and peripheral port share the same Atmega pins: PD2/PD3 (RXD1/TXD1). The USB takes a detour through a USB subsystem, but then feeds the same USART1 on the main processor. I'd be very surprised if the USB-Serial on this board were a bottleneck.

Thanks for the experiment!

Posted : 26/01/2018 2:44 am
Page 7 / 7
Share: