Heatbed cable with Ikea Lack Enclosure.  

RE: Heatbed cable with Ikea Lack Enclosure.

Picture to illustrate your point? I have several Mk3Ss in LACK v2 enclosures, using an angled cover, without any issues whatsoever, so I assume there’s something not correctly assembled or the cable routing is off.

RE: Heatbed cable with Ikea Lack Enclosure.

Posted by: @fuchsr

Picture to illustrate your point? I have several Mk3Ss in LACK v2 enclosures, using an angled cover, without any issues whatsoever, so I assume there’s something not correctly assembled or the cable routing is off.

I already have returned the stock cover.
Can you please take a photo of your printer with cover 60 deg., when the heatbed is pushed forward as far as possible (towards the LCD panel) and the hotend is at the bottom left.

Thank you in advance.

RE: Heatbed cable with Ikea Lack Enclosure.

@yakov

Wish I could do that but I'm out of town for a few more weeks, with no access to my printers. To see how the heatbed cover looks like for me, you can take a look at the make I posted: https://www.thingiverse.com/make:850251. I remember I first tried a different cover model but I can't recall what it was, which didn't quite work as well for me.

I never noticed any issues pushing the bed forward and the hotend in the left position, so I don't have a picture I could share at this point.

Maybe someone else on this forum can help.

RE: Heatbed cable with Ikea Lack Enclosure.

@yakov

Don't know if you solved your cable problem but see if this will help.

Regards/Livius

RE: Heatbed cable with Ikea Lack Enclosure.

@livius

Thanks for sharing that.  I am using a different one, but this is better.