Notifications
Clear all

Enclosure Fume Filter For 3D printers and others  

  RSS
Tiago
(@tiago)
Reputable Member
Enclosure Fume Filter For 3D printers and others

My final solution for ABS fumes: https://www.thingiverse.com/thing:3453788
Description can be find there.





Posted : 27/02/2019 1:19 am
Martin_au
(@martin_au)
Reputable Member
Re: Enclosure Fume Filter For 3D printers and others

Nice. I think I'll make this.

Posted : 27/02/2019 6:46 am
cwbullet
(@cwbullet)
Member
Re: Enclosure Fume Filter For 3D printers and others

Thanks for sharing. I think this is on my next mod list.

--------------------
Chuck H
3D Printer Review Blog

Posted : 27/02/2019 12:11 pm
nic
 nic
(@nic-3)
Eminent Member
Re: Enclosure Fume Filter For 3D printers and others

Thank you for sharing!

More importantly, thank you for taking the time to monitor and measure how effective the filter actually is!

Posted : 01/03/2019 5:48 am
Tiago
(@tiago)
Reputable Member
Topic starter answered:
Re: Enclosure Fume Filter For 3D printers and others

Thank you, i'm designing another variant for a centrifugal fan, if you wan't to wait... Compatible fans: https://www.sanyodenki.com/archive/document/product/cooling/catalog_E_pdf/San_Ace_97BMB33_E.pdf
More static, more performance passing the filter. 7.63 mmH2O Noctua vs 130 mmH2O on the best model (9BMB24P2K01). To much power draw for the porpouse but since i have a PWM controller i'm good

Posted : 01/03/2019 7:15 am
Tiago
(@tiago)
Reputable Member
Topic starter answered:
Re: Enclosure Fume Filter For 3D printers and others

New version to be uploaded soon as i test it... Can be mounted only inside enclosure.
Drastic improvement on static (More performance passing the filters)
It use San Ace B97 9BMB series: https://www.sanyodenki.com/archive/document/product/cooling/catalog_E_pdf/San_Ace_97BMB33_E.pdf

Posted : 06/03/2019 5:15 pm
Tiago
(@tiago)
Reputable Member
Topic starter answered:
RE: Enclosure Fume Filter For 3D printers and others

New version is up and full functional

Posted : 08/05/2019 2:26 pm
--
 --
(@)
Illustrious Member
RE: Enclosure Fume Filter For 3D printers and others

You're venting an enclosure with only 4 or 5 cubic feet of volume; do you need 50 CFM?  It seems like there should be a good, quiet, 5 CFM fan somewhere that has a fair static pressure rating hat can push the air out a long vent channel. Plus, less flow improves charcoal contact time and will improve filter performance.

This post was modified 5 years ago by --
Posted : 12/05/2019 6:11 pm
Tiago
(@tiago)
Reputable Member
Topic starter answered:
RE: Enclosure Fume Filter For 3D printers and others
Posted by: Tim

You're venting an enclosure with only 4 or 5 cubic feet of volume; do you need 50 CFM?  It seems like there should be a good, quiet, 5 CFM fan somewhere that has a fair static pressure rating hat can push the air out a long vent channel. Plus, less flow improves charcoal contact time and will improve filter performance.

I don't know about feet meassurements but my box is +/- 60 cm^3 inside (Cubic Area).

After many tests this give the ultimate solution, low static will not pass long filters like mine, worse if use GAC, sure there are smaller fans that can do the job with less but why go less and then regret? With PWM control i have the power to adjust, so i can turn that 50 CFM into 20CFM or whatever i want down with speed control, so "Plus, less flow improves charcoal contact time and will improve filter performance." is achieved, unless you don't want to install a speed control and run fan at full power mode.

Using a beast fan like that give you the following:

  1. Fast Purge (Print with fan off, then print finish, wan't open door fast? No problem switch this at max speed - Fast Purges)
  2. Wan't silent? No problem, just turn speed down, i found after purge the box i can run fan at 30% speed and mantain almost no particles inside with positve static. That is as silent as the printer moves. Or run at 30-20% from start to always have the box clear.
  3. Never regret going a inferior or less capable fan
  4. Cheap fan!
  5. Future proof if you increase your area or maybe multiple printers

 

This post was modified 5 years ago by Tiago
Posted : 13/05/2019 6:19 pm
Tiago
(@tiago)
Reputable Member
Topic starter answered:
RE: Enclosure Fume Filter For 3D printers and others

About 3m to purge all the air, at max speed, while printing.

This post was modified 5 years ago by Tiago
Posted : 13/05/2019 6:20 pm
Tiago
(@tiago)
Reputable Member
Topic starter answered:
RE: Enclosure Fume Filter For 3D printers and others

Results with 30% fan speed (Stable purge)

Posted : 13/05/2019 6:45 pm
bobstro liked
bobstro
(@bobstro)
Illustrious Member
RE: Enclosure Fume Filter For 3D printers and others

Would you mind sharing a link to the air quality monitor you're using? The inexpensive ones I've found don't have very good reviews. Thanks.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 13/05/2019 7:07 pm
Tiago
(@tiago)
Reputable Member
Topic starter answered:
RE: Enclosure Fume Filter For 3D printers and others
Posted by: bobstro

Would you mind sharing a link to the air quality monitor you're using? The inexpensive ones I've found don't have very good reviews. Thanks.

I use two, the blue from video: https://www.aliexpress.com/item/Formaldeyde-HCHO-PM1-0-PM2-5-PM10-Gas-Analyzer-TVOC-Particles-Detector-Meter-PM-2-5/32841491809.html

The internal for Octoprint plugin: https://www.aliexpress.com/item/NAVO-SDS011-Laser-Dust-Detective-Sensor-Board-PM2-5-High-Precision-Air-Quality-Detection-Sensor-Air/32952672554.html

They all will have a lifespan, the more reads the more sensor wear

Posted : 13/05/2019 8:37 pm
jhb
 jhb
(@jhb)
New Member
RE: Enclosure Fume Filter For 3D printers and others

Excellent work.  Would you mind sharing your PWM controller, either a link where to buy it or some schematics? 

Thanx in advance

Cheers

Jörg

Posted : 24/09/2019 8:29 am
Tiago
(@tiago)
Reputable Member
Topic starter answered:
RE: Enclosure Fume Filter For 3D printers and others

Hello,

The module on pictures was a prototype made by me to controll my enclosure and fans.

I've made a special DIY module for fan PWM controll that respect the norm and is top notch, you can find it here: https://www.ebay.co.uk/itm/183894047866

Otherwise you can buy a DC switching module with regulation (Cheaper)

 

thanks for your support

Posted : 24/09/2019 2:20 pm
Lukas M
(@lukas-m)
New Member
RE: Looks great!
Posted by: @tiago-2

Hello,

The module on pictures was a prototype made by me to controll my enclosure and fans.

I've made a special DIY module for fan PWM controll that respect the norm and is top notch, you can find it here: https://www.ebay.co.uk/itm/183894047866

Otherwise you can buy a DC switching module with regulation (Cheaper)

 

thanks for your support

Hola Tiago,

 

Thank you for sharing this very cool design! Have you been using it as is, or made any modifications in the meantime? I'd like to start printing ABS at home, but want to do everything I can to stop any dangerous particles and fumes from making it outside the enclosure. Really like the idea of using bulk charcoal granules vs. more expensive yet less effective charcoal filter mats.

 

Cheers,

Lukas

This post was modified 2 years ago by Lukas M
Posted : 06/10/2021 3:30 pm
Share: