English
Forums
English forum
Original Prusa i3 MK3 & MK3S & MK3S+
User mods - OctoPrint, enclosures, nozzles, ...
Start Print Timer through OctoPrint
 
Notifications
Clear all

Start Print Timer through OctoPrint  

    Last Post
  RSS
Frank Deschner
 Frank Deschner
(@frank-deschner)
Active Member
Start Print Timer through OctoPrint

I am using Cura and OctoPrint for my files and find it annoying that the print timer on the Prusa Display doesn't work. I have tried to integrate M75 in the start GCode, but the Prusa Firmware doesn't support this GCode. 

How does Slic3r do the trick? I couldn't find anything in its GCode.

Does anyone have an idea how to solve this problem?

This topic was modified 4 years ago by Frank Deschner
Posted : 24/11/2019 12:02 am
Mike Daneman
 Mike Daneman
(@mike-daneman)
Estimable Member
RE: Start Print Timer through OctoPrint
Posted by: @frank-d5

I am using Cura and OctoPrint for my files and find it annoying that the print timer on the Prusa Display doesn't work. I have tried to integrate M75 in the start GCode, but the Prusa Firmware doesn't support this GCode. 

How does Slic3r do the trick? I couldn't find anything in its GCode.

Does anyone have an idea how to solve this problem?

Prusa Slicer uses the M73 command to tell the printer how much time is left.

Posted : 11/12/2019 4:38 am
Frank Deschner
 Frank Deschner
(@frank-deschner)
Active Member
Topic starter answered:
RE: Start Print Timer through OctoPrint

@mdaneman

Thank you. I found that out too. Now I just need to find a plug-in or something to control it. 

Posted : 11/12/2019 5:27 pm
  All forum topics
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  OctoPrint (179), Timer (2), GCode (147), print time (13),
Share: