Notifications
Clear all

magnetic 3d printing bed brace  

  RSS
Rob Latour
(@rob-latour)
Eminent Member
magnetic 3d printing bed brace

I was having trouble with tall prints coming detached from the print bed so I designed this magnetic 3d printing bed brace.

You can see it in action here:

and you can get it here: https://www.thingiverse.com/thing:4062532

 

Posted : 22/12/2019 11:41 pm
Peter M
(@peter-m)
Noble Member
RE: magnetic 3d printing bed brace

Align model in the Y-direction.

Use a big brim , attached to the model. Make brim very big.

Use glue stick.

Clean bed very good, is needed for holding model.

Print first layer slower and hotter to get better sticking power.

This is normally enough.

Posted : 24/12/2019 8:58 pm
jacuellar1989
(@jacuellar1989)
Member
RE: magnetic 3d printing bed brace

While the stock build surface is good, I have had better luck with the PEI flex plate from www.3DMakerEngineering.com

Give it a try and let me know what you think!

Posted : 06/01/2020 8:49 pm
Share: