magnetic 3d printing bed brace  

Active Member

I was having trouble with tall prints coming detached from the print bed so I designed this magnetic 3d printing bed brace.

You can see it in action here:

and you can get it here:


Posted : 22/12/2019 11:41 pm
Peter M
Prominent Member

Align model in the Y-direction.

Use a big brim , attached to the model. Make brim very big.

Use glue stick.

Clean bed very good, is needed for holding model.

Print first layer slower and hotter to get better sticking power.

This is normally enough.

Posted : 24/12/2019 8:58 pm
New Member

While the stock build surface is good, I have had better luck with the PEI flex plate from

Give it a try and let me know what you think!

Posted : 06/01/2020 8:49 pm

Please Login or Register