How to use 0.15mm nozzle with current firmware on a MK3s  

  RSS
johannes.busch
(@johannes-busch)
New Member

Hey,

i changed my nozzle to a 0.15mm nozzle. If i slice in Slicer PE, i get the message that my nozzle diameter is wrong. Also, in the HW setting of the printer, i can not change it to anything different than the "supported" nozzle sizes.

Do i need to alter the firmware? or the gcode? i am lost. 

Posted : 09/10/2019 5:00 pm
bobstro
(@bobstro)
Famed Member

That is just a warning you can ignore. I believe you can disable it in the printer settings menu if desired. If the actual nozzle mounted matches the slicer settings, and those are correct (nozzle size, extrusion width and layer height) it will be fine. 

My notes and disclaimers on 3D printing and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan...
Posted : 09/10/2019 9:56 pm
johannes.busch
(@johannes-busch)
New Member

Thanks! I will try 🙂

Posted : 10/10/2019 9:04 am
Karl Herbert
(@karl-herbert)
Noble Member

@johannes-busch

Welche Slicer-Einstellungen verwendest Du? Hast du schon die ersten Erfahrungen mit der 0.15er gemacht?

Danke!

LG, Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 05/12/2019 3:11 pm
Share:

Please Login or Register