Notifications
Clear all

How to attach bowden tube to extruder? PC4 Fittings?  

  RSS
Dave
 Dave
(@dave-2)
Active Member
How to attach bowden tube to extruder? PC4 Fittings?

I made myself a nice little dry box. I have some lengths of ptfe tubing and some "pc4" fittings that the tubing fits into nicely. Both m6 and m10.

How do people usually go about actually attaching the tube and/or fitting to the extruder? Is there a modded "FS-cover" that folks use?

Specifically, its this part at the top of the extruder that I am referring to:

FS-cover

For the following steps, please prepare:

Posted : 09/03/2020 2:53 am
kennd
(@kennd)
Reputable Member
RE: How to attach bowden tube to extruder? PC4 Fittings?

I would start by going to Prusaprinters- explore all prints, select 3d printers on left and search on Bowden. And see if there is one among the many that will work for you and what you have on hand.

Quality is the Journey, not the Destination. My limited prints->

Posted : 09/03/2020 9:56 pm
Share: