Notifications
Clear all
Print curved in towards the centre
Hey guys...need some advice on how to correct my print which is curling towards the centre.
https://twitter.com/godspeeeeed/status/812306514899673088/photo/1
Thanks in advance.
I am using S3D as a slicer.
Posted : 23/12/2016 3:43 pm
Re: Print curved in towards the centre
Turn extruder temp down a bit - looks too hot to me.
Posted : 23/12/2016 5:30 pm
Topic starter
answered:
Re: Print curved in towards the centre
Thanks Andrew
I will try to lower the temperature and see if this solve the problem. Thanks alot!
Posted : 24/12/2016 4:20 am
Re: Print curved in towards the centre
If this is PLA, also make sure your part cooling fan is working
If this affects only the bottom 25mm part of the print, heat from the bed might have an influence too.
Posted : 24/12/2016 4:38 am