Notifications
Clear all

[Closed] Limit switches! N-O or N-C??  

  RSS
michae-14
(@michae-14)
New Member
Limit switches! N-O or N-C??

Hey guys! I am currently tethering on the edge of entering the 3D printing world, trying desperately to finally cross that line. I was given a (90% complete) assembled 3D printer with 98% of the total parts, and no information or instructions whatsoever!

It is a VERY basic machine which I have matched most closely to a HICTOP Reprap Prusa i3 (with a RepRap V1.3 RAMPS board).
I have managed to track down all the outstanding parts (mostly just cables), except for the endstop switches!
Unfortunately I cant get the original full endstop switches on their cables (since nobody in South Africa sells the exact ones and I can't get them sent to me from the US), like these: https://www.amazon.com/gp/product/B014Y0VGOU/ref=ask_ql_qh_dp_hza

However I've managed to buy the actual switches themselves and the plugs to connect to the board. Now I just need to connect them up, but I need to know if the switches are wired NO (normally open) or NC (Normally closed)?

ie: does pressing the switch open or close the circuit?

 

If anybody can help me here at all I would REALLY appreciate it!!

Thanks a lot

Mike
 

Posted : 10/07/2020 9:36 am
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Limit switches! N-O or N-C??

Hi Mike, 

you can use  either, normally open or normally closed, if the switch doesn't work correctly you can either change the logic in the firmware.  or change the function on the switches

regards Joan

 

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 10/07/2020 10:08 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Limit switches! N-O or N-C??
Posted by: @michae-14

Hey guys! I am currently tethering on the edge of entering the 3D printing world, trying desperately to finally cross that line. I was given a (90% complete) assembled 3D printer with 98% of the total parts, and no information or instructions whatsoever!

It is a VERY basic machine which I have matched most closely to a HICTOP Reprap Prusa i3 (with a RepRap V1.3 RAMPS board).
I have managed to track down all the outstanding parts (mostly just cables), except for the endstop switches!
Unfortunately I cant get the original full endstop switches on their cables (since nobody in South Africa sells the exact ones and I can't get them sent to me from the US), like these: https://www.amazon.com/gp/product/B014Y0VGOU/ref=ask_ql_qh_dp_hza

However I've managed to buy the actual switches themselves and the plugs to connect to the board. Now I just need to connect them up, but I need to know if the switches are wired NO (normally open) or NC (Normally closed)?

ie: does pressing the switch open or close the circuit?

 

If anybody can help me here at all I would REALLY appreciate it!!

Thanks a lot

Mike
 

Hallo and welcome in Prusaforum!

Here you will find a lot of information about the different versions of the Ramps boards: https://reprap.org/wiki/RAMPS_1.3

In most cases they are NC, i think also on Ramps V1.3.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 10/07/2020 10:11 am
michae-14
(@michae-14)
New Member
Topic starter answered:
RE: Limit switches! N-O or N-C??

@karl-herbert

Thanks a lot Karl! really appreciate it!

Posted : 13/07/2020 7:26 am
michae-14
(@michae-14)
New Member
Topic starter answered:
RE: Limit switches! N-O or N-C??

@joantabb

Thanks a lot Joan!
The more I learn about 3D printing the more I realise I'm only just starting to scratch the surface! 😆 

Posted : 13/07/2020 7:27 am
Share: