Notifications
Clear all

[Closed] Strange vertical lines  

  RSS
Sharkys
(@sharkys)
Active Member
Strange vertical lines

Hi,

MK3S / PETG Verbatim / standard Prusa Slicer settings for 0,2 Quality print and I'm getting those strange vertical lines.

Any thoughts please ? While it's not a big issue, apparently something is wrong...

Appreciate any advice.

https://www.thingiverse.com/thing:1783449

 

Best Answer by Peter M:

What is inside of the model? How many perimeters, etc, more info helps a lot.

Search in the forum there are threads about lines that come through to the outside, and some solutions.

 

Posted : 02/08/2020 8:31 pm
Sharkys
(@sharkys)
Active Member
Topic starter answered:
RE: Strange vertical lines

Another view

Posted : 02/08/2020 8:31 pm
Peter M
(@peter-m)
Noble Member
RE: Strange vertical lines

What is inside of the model? How many perimeters, etc, more info helps a lot.

Search in the forum there are threads about lines that come through to the outside, and some solutions.

 

Posted : 02/08/2020 8:52 pm
Sharkys
(@sharkys)
Active Member
Topic starter answered:
RE: Strange vertical lines

 

I was actually wondering, how to search this problem, how to "name" it. So you are suggesting there are not enough perimeters and the infill comes through? I didn't consider this, now when I'm looking on GCode 2D visualisation, it's clear. Thank you.

 

 

Posted : 02/08/2020 9:43 pm
Sharkys
(@sharkys)
Active Member
Topic starter answered:
RE: Strange vertical lines

So basically choosing another infill or in this case, even option "Detect thin walls" in PrusaSlicer is the way to go.

Posted : 02/08/2020 10:24 pm
Peter M
(@peter-m)
Noble Member
Peter M
(@peter-m)
Noble Member
Share: