Notifications
Clear all

[Closed] PE Slic3r failed to slice Digital Sundail  

  RSS
david.b14
(@david-b14)
Honorable Member
PE Slic3r failed to slice Digital Sundail

I was trying to print the digital sundial with PE Slic3r, it failed at z=6.00 for the Gnomon_Southern.stl file.

The model is missing a part in the corner. Cura seems to slice it okay.

http://www.thingiverse.com/make:288077

Update: the Gnomon_Southern_NETFABBED.stl worked okay on PE Slic3r as far as I can tell...printing now.

Posted : 14/01/2017 6:49 am
Vojtěch Bubník
(@vojtech-bubnik)
Member Admin
Re: PE Slic3r failed to slice Digital Sundail

David,

thanks for the heads up. It would be much more convenient for me, if you could please add the issue into the issue tracker.
https://github.com/prusa3d/Slic3r/issues

Thanks

Posted : 19/01/2017 12:08 pm
david.b14
(@david-b14)
Honorable Member
Topic starter answered:
Re: PE Slic3r failed to slice Digital Sundail

No problem, I will do this in moving forward. Thanks for the excellent work on the PE edition of Slic3r, it is may favorite of the ones that I use.

Posted : 19/01/2017 2:07 pm
thatdecade
(@thatdecade)
Active Member
RE: PE Slic3r failed to slice Digital Sundail

Ran into this issue too and found this thread at the top of the google results.  Here is the solution:  The model is broken.

Mojoptix uploaded an updated model labeled NETFABBED that slices correctly in PrusaSlicer.

This post was modified 4 years ago by thatdecade
Posted : 29/02/2020 2:33 am
rmm200
(@rmm200)
Noble Member
RE: PE Slic3r failed to slice Digital Sundail

One of the few times I approve of a necroed post (over 3 years ago...).

Good find.

Posted : 29/02/2020 4:28 am
Share: