Notifications
Clear all

[Closed] Ideamaker profiles  

  RSS
Intrudermax
(@intrudermax)
Eminent Member
Ideamaker profiles

Is anybody using Ideamaker? Do you have profiles you would be willing to share?

Posted : 01/01/2018 10:34 pm
pascal.g5
(@pascal-g5)
Eminent Member
Re: Ideamaker profiles

I am also searching for profiles..... Did you find something yet?

Posted : 27/07/2018 6:10 pm
Stigern
(@stigern)
New Member
RE: Ideamaker profiles

http://projects.ttlexceeded.com/3dprinting_ideamaker.html

 

Haven't tested myself yet.

Posted : 19/06/2020 10:07 am
bobstro
(@bobstro)
Illustrious Member
RE: Ideamaker profiles

A quick heads-up: A recent Prusa firmware update changed how extruder moves are affected by some commands. The profiles on that page may suffer from the prime line not printing, or erratic extruder movement. I'm updating the profiles and hope to update the page this weekend. I will provide a basic Mk3 profile for 0.4mm nozzle, PLA and PETG profiles and 0.15 and 0.20mm layer height profiles. These work but are best thought of as a starting point rather than any sort of magic profiles. Let me know if you like something else.

I'll update here when done. Stay tuned. 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 20/06/2020 1:24 am
bobstro
(@bobstro)
Illustrious Member
RE: Ideamaker profiles

I've updated the profiles. Please let me know if you encounter any problems.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 20/06/2020 5:01 pm
Share: