Notifications
Clear all

First layer calibration problems  

  RSS
josh.h7
(@josh-h7)
Active Member
First layer calibration problems

Hi,

I am having quite a bit of trouble with my first layers, the z offset likes to change around every couple of prints and is really affecting my work. I hope you can see in the image that the line is squashed in one direction but not the other, this is the V2 calibration .gcode. Aside from that when i finally find the correct offset, it "changes" after a print or two always making it squish into the board.

Another problem I seem to have is my outlines don't merge with each other towards the rear left hand side of the board. So they are always visible as two separate lines. I have tried changing the individual offsets on my S3D script and on the printer itself... with no joy.

Help anyone? Please! 🙂

Thanks

Josh

Posted : 19/11/2017 12:13 pm
josh.h7
(@josh-h7)
Active Member
Topic starter answered:
Re: First layer calibration problems

Moved to
https://shop.prusa3d.com/forum/original-prusa-i3-mk2-f23/first-layer-squishing-problems-t6674.html

Posted : 19/11/2017 12:21 pm
Share: