Notifications
Clear all

[Closed] ASA printing on Powder-Coated vs. PEI-Sheet  

  RSS
LingChristian
(@lingchristian)
Active Member
ASA printing on Powder-Coated vs. PEI-Sheet

Hey there.

 

I´ve got a massive problem on the Powder-Coated sheet when printing with ASA. Sometimes on small objects, the Brim stays on the bed and can only be removed with much Isopropanol and the massive use of my finger nails. On the other hand bigger objects doenst stick on the bed.

 

What I´ve tried for now:

- First Layer Calibration

- Put the fan to zero

- added 5mm brim

- had an enclosure and constant 30-33°C

- constant Bed-Temp of 110°C even on first Layer

 

... but that doens´t helped at all. Any ideas?

 

 

Posted : 01/04/2020 8:26 pm
Share: