Notifications
Clear all

[Closed] Simplfy 3D Settings for TPU / PLA / PETG  

  RSS
Phaser3D
(@phaser3d)
Member
Simplfy 3D Settings for TPU / PLA / PETG

Simplify 3D Settings!
PLA - https://www.dropbox.com/s/vuzcb1cul75z3i5/MK3%20PLA.fff?dl=0
PETG - https://www.dropbox.com/s/midu2wqej7goqug/MK3%20PETG.fff?dl=0
TPU - https://www.dropbox.com/s/cp2xgmqqy988qs9/MK3%20TPU.fff?dl=0

There is also a MK3 STL u can download here - https://www.dropbox.com/s/w5rocx1j30ff98t/Prusa_MK3_Assy_STL_-_FULL.STL?dl=0

Simply place that STL in this folder %userprofile%\AppData\Local\Simplify3D\S3D-Software\

Or follow instructions here. note I have already put the code in the FFF files above. https://www.dropbox.com/s/fffd3d0t5ub1kqf/Instructions%20for%20S3D%20Background%20Image.txt?dl=0

Source for STL I have - https://www.thingiverse.com/thing:2751051
I am using a custom Shroud here - https://www.thingiverse.com/thing:2720541

I would love all feedback so please if you use it and improve upon it or have questions please let me know!

Posted : 14/01/2018 10:47 pm
Rods liked
Brigandier
(@brigandier)
Reputable Member
Re: Simplfy 3D Settings for TPU / PLA / PETG


Simplify 3D Settings!
PLA - https://www.dropbox.com/s/vuzcb1cul75z3i5/MK3%20PLA.fff?dl=0
PETG - https://www.dropbox.com/s/midu2wqej7goqug/MK3%20PETG.fff?dl=0
TPU - https://www.dropbox.com/s/cp2xgmqqy988qs9/MK3%20TPU.fff?dl=0

There is also a MK3 STL u can download here - https://www.dropbox.com/s/w5rocx1j30ff98t/Prusa_MK3_Assy_STL_-_FULL.STL?dl=0

Simply place that STL in this folder %userprofile%\AppData\Local\Simplify3D\S3D-Software\

Or follow instructions here. note I have already put the code in the FFF files above. https://www.dropbox.com/s/fffd3d0t5ub1kqf/Instructions%20for%20S3D%20Background%20Image.txt?dl=0

Source for STL I have - https://www.thingiverse.com/thing:2751051
I am using a custom Shroud here - https://www.thingiverse.com/thing:2720541

I would love all feedback so please if you use it and improve upon it or have questions please let me know!

Will be interesting to compare these to the settings in the S3D thread Josef posted. I print primarily in PETG using Slic3r, will let you know how these go when I am back at my printer next week. 🙂

My MK3 Parts: [Bowden] [New Shoes] [TPU Micro Springs]

Posted : 14/01/2018 10:58 pm
dale.c2
(@dale-c2)
New Member
Re: Simplfy 3D Settings for TPU / PLA / PETG

So I tried the PETG profile and my Mk3 isn't recognizing the G-code file. It just doesn't show up in the files on my MK3.

EDIT: As usual it was my error. I had illegal characters in my file name. 😀

Posted : 28/05/2018 3:53 am
tegmento
(@tegmento)
Active Member
RE: Simplfy 3D Settings for TPU / PLA / PETG

link are dead. if possible re upload profiles.

Posted : 16/12/2019 10:22 am
Rods liked
Rods
 Rods
(@rods)
New Member
RE: Simplfy 3D Settings for TPU / PLA / PETG
Posted by: @rhys-e

Simplify 3D Settings!
PLA - https://www.dropbox.com/s/vuzcb1cul75z3i5/MK3%20PLA.fff?dl=0
PETG - https://www.dropbox.com/s/midu2wqej7goqug/MK3%20PETG.fff?dl=0
TPU - https://www.dropbox.com/s/cp2xgmqqy988qs9/MK3%20TPU.fff?dl=0

There is also a MK3 STL u can download here - https://www.dropbox.com/s/w5rocx1j30ff98t/Prusa_MK3_Assy_STL_-_FULL.STL?dl=0

Simply place that STL in this folder %userprofile%\AppData\Local\Simplify3D\S3D-Software\

Or follow instructions here. note I have already put the code in the FFF files above. https://www.dropbox.com/s/fffd3d0t5ub1kqf/Instructions%20for%20S3D%20Background%20Image.txt?dl=0

Source for STL I have - https://www.thingiverse.com/thing:2751051
I am using a custom Shroud here - https://www.thingiverse.com/thing:2720541

I would love all feedback so please if you use it and improve upon it or have questions please let me know!

link is broken, repost pleaseee

Posted : 02/07/2020 8:58 pm
Share: