Notifications
Clear all
PID calibration causes restart 3.1.1 rc1 b121
My MK3 came loaded with firmware 3.1.1 rc1 b121. When I attempt to run the PID calibration the board resets and nothing happens. I also see my failure stats are at 255.
Also, are there any instructions showing how to connect an rpi and how that might work with features like slip detection, power loss etc?
The firmware has several very unclear messages i.e. Did color clear? —>Did filament extrude from nozzle?
Posted : 10/12/2017 7:04 am