Notifications
Clear all

Z Seam Gap, ragged rough walls  

  RSS
ChaosTheory
(@chaostheory)
New Member
Z Seam Gap, ragged rough walls

Posted : 18/11/2020 4:06 am
ChaosTheory
(@chaostheory)
New Member
Topic starter answered:
RE: Z Seam Gap, ragged rough walls
Help! My machines stopped printing the gap closed. I tried adjusting temp, tightening the belts, screw tightening in the extruder, oiled rails and fresh nozzle, 
Posted : 18/11/2020 4:14 am
Share: