Notifications
Clear all

Slicer settings for LW-PLA RC Aircraft  

  RSS
Robcarp
(@robcarp)
New Member
Slicer settings for LW-PLA RC Aircraft

Hi,

I am looking for guidance and settings for the LW-PLA filament made by ESun. I am not having any success using the supplied Cura profiles supplied by Eclipson.

Posted : 13/09/2021 10:30 pm
cwbullet
(@cwbullet)
Illustrious Member
RE: Link

Can you post a link to the settings and I would upload a sample 3MF file so I can test it?  

You will need to zip that file.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 14/09/2021 10:19 am
Robcarp
(@robcarp)
New Member
Topic starter answered:
Uploading files

I have saved the project file but am unable to upload the .3mf file. Support have advised that for security reasons I cannot upload.

 

Posted : 14/09/2021 11:32 am
JoanTabb
(@joantabb)
Moderator

Hi Rob, 
If you ZIP Compress, the .3mf file. then you should be able to post the zip file. 
Either as an embedded file in the post text

treefrog_45_cut

or an attachment  at the bottom of a post

regards Joan

Attachment removed
I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 14/09/2021 12:36 pm
Baklin
(@baklin)
Reputable Member

Maybe this video will help you tweak the settings. He uses Cura and not a Prusa, but atleast you can check what he changed between Colorfabb and Esun.

 

Posted : 14/09/2021 1:20 pm
Robcarp
(@robcarp)
New Member
Topic starter answered:
Success!

Hi all, 

Thanks for the support. Due to your replies and further research I have been able to download a Cura profile for the Prusa Mk3S.

I am using ESun LW-PLA and the result has very little stringing.

Posted : 15/09/2021 11:55 pm
Share: