Notifications
Clear all

Printing with 82A FILAFLEX 500 GR?  

  RSS
madaeon
(@madaeon)
New Member
Printing with 82A FILAFLEX 500 GR?

Hi, I tried to print this file (cylinder), after some layers (approx 1cm) this happens. I used the same settings that worked with a sample of the same filament. I have updtaed the firmware of my mk3s, does this matter? Thanks!

https://drive.google.com/open?id=19KKL3AdQalv8U4filfo5It3az5M-5R36 3MF file here

Posted : 07/06/2021 6:33 pm
Dan Rogers
(@dan-rogers)
Noble Member
RE: Printing with 82A FILAFLEX 500 GR?

Slower. Slow the max speed to 15.

 

Posted : 11/06/2021 1:35 am
madaeon
(@madaeon)
New Member
Topic starter answered:
RE: Printing with 82A FILAFLEX 500 GR?

@dan-rogers

I will try, thanks!

Posted : 11/06/2021 10:45 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Printing with 82A FILAFLEX 500 GR?

slow the max speed to 1.5 MVS also make sure your bondtech gear tension is proper

 

Good Luck

 

Swiss_Cheese

The Filament Whisperer...
Posted : 12/06/2021 1:33 am
Share: