Notifications
Clear all

printing problem? or slicing?  

  RSS
simon B
(@simon-b-3)
New Member
printing problem? or slicing?

hello printing fam

i got a strange problem when printing a large object on the pictures you see a line after the top solid infill

i already changed the vertical shells perimeters to 4

the red pictures from mk3s+

the black picture from mk2 

all sliced with prusaclicer

printed PLA

maybe someone knows a sulution?

thanks 

 

 

when im printing a small part of the big part the result is better 

 

also some strange wave in the top solid infill 1 one corner

prusaslicer the wall is straight 

 

in this picture you see the problem

this black print got the same problem on my mk2 

prusaclicer makes a top solid infill to the outside wall

 

this was sliced with cura 

cura keeps the wall with infill, without a solid layer in between 

the result with cura is much better but i dont like the rest of the print quality with cura 

Posted : 17/10/2021 9:50 am
cwbullet
(@cwbullet)
Member
Slicing

I suspect this is a slicing problem.  Upload a 3MF File and we can check it for you:

--------------------
Chuck H
3D Printer Review Blog

Posted : 17/10/2021 12:58 pm
simon B
(@simon-b-3)
New Member
Topic starter answered:
file

thanks for the reply

https://mega.nz/file/ahEQFb6R#_bWQcm3gYbHj0NuV3fT4vDkbEhxKSL7t3NAhaoH4ytk

Posted : 17/10/2021 1:54 pm
sylviatrilling
(@sylviatrilling)
Honorable Member
RE: External perimeters

You could try it with enabling 'external perimeters first'. See https://help.prusa3d.com/en/article/layers-and-perimeters_1748#external-perimeters-first

Mk3S+,SL1S

Posted : 17/10/2021 5:52 pm
Share: