Notifications
Clear all

[Solved] Print other Items  

Page 3 / 4
  RSS
MinorMatt
(@minormatt)
Eminent Member
RE: Print other Items

That print sheet looks posatively disgustingly filthy - get it properly clean with some unscented dish soap and water (when its clean the water will just run off and you will be left with a few spots to dry off with a paper towel).  Use a clean paper towel to apply dish soap and wash it - you don't want to be smearing last nights curry on it...

The Z height also looks too high - have you done the calibration?  If not search for "life adjust z height - my way" and have a read.  Might be worth a read anyway tbh

Posted : 26/05/2021 2:24 pm
ssill2 liked
ssill2
(@ssill2)
Noble Member
RE: Print other Items

@minormatt

Agreed.  Dawn platinum scrub with hot water to get all that grime off.  Then a few runs of the 75mm test square to get that first layer dialed in.  If printing with PETG spray the sheet with original formula windex and wipe with a paper towel but leave a thin layer of windex on it to dry.

Here's the life z adjust

https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-assembly-and-first-prints-troubleshooting/life-adjust-z-my-way/

 

Posted : 26/05/2021 2:28 pm
cwbullet
(@cwbullet)
Member
RE: Print other Items

@ssill2

The Dawn Platinum is really cheap at Dollar General.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 26/05/2021 4:17 pm
ssill2
(@ssill2)
Noble Member
RE: Print other Items

@cwbullet

Ah good to know.  Not that much is required so a big bottle lasts me quite a while lol.   It really does the trick though.  I save the 99% IPA for the textured sheet.

Posted : 26/05/2021 4:20 pm
cwbullet
(@cwbullet)
Member
RE: Print other Items

@ssill2

The also sell the Dawn sponges for about a buck.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 26/05/2021 4:32 pm
hawai
(@hawai)
Reputable Member
RE: Print other Items

Ekke Ekke Ekke Ekke Ptang Zoo Boing!

Posted : 28/05/2021 9:10 am
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Print other Items

@hawai

 

I'm sorry I missed that party, it sounds like a good time was had by all.

The Filament Whisperer

Posted : 28/05/2021 2:39 pm
cwbullet
(@cwbullet)
Member
RE: Print other Items

@swiss_cheese

I am not sure that is the party you should be looking for.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 28/05/2021 2:41 pm
ssill2
(@ssill2)
Noble Member
RE: Print other Items

The obligatory meme reference 🙂

Posted : 28/05/2021 2:43 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Print other Items

@ Charles

 

I concur

The Filament Whisperer

Posted : 28/05/2021 2:51 pm
cwbullet
(@cwbullet)
Member
RE: Print other Items

@ssill2

Especially not that party.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 28/05/2021 3:15 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Print other Items

They did cancel "Burning Man" this year, so it stands to reason, they have to have an outlet somewhere, this may not be the last time we see this 🤨 

The Filament Whisperer

Posted : 28/05/2021 5:45 pm
cwbullet
(@cwbullet)
Member
RE: Print other Items

@swiss_cheese

I hope covid ends soon.  So much of our lives are being delayed or canceled.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 28/05/2021 5:52 pm
bobstro
(@bobstro)
Illustrious Member
RE: Print other Items

Things are really looking up here. Over 50% vaccination rates, mask and density restrictions are easing, but no ominous plateau on rate of decline. 

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 28/05/2021 7:29 pm
ssill2
(@ssill2)
Noble Member
RE: Print other Items

@swiss_cheese

I wouldn’t call burning man a big loss lol

Posted : 28/05/2021 7:55 pm
younex
(@younex)
New Member
Topic starter answered:
RE: Print other Items

Thank you guys for great feedback!

Posted : 28/05/2021 8:19 pm
ssill2
(@ssill2)
Noble Member
RE: Print other Items

@younex

Sure lol

Posted : 28/05/2021 8:20 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Print other Items
Posted by: @ssill2

@swiss_cheese

I wouldn’t call burning man a big loss lol

I was not trying to confirm nor deny it's validity, I was merely suggesting we have that to thank for the "Ooh Eeh Ooh Ah Ah Ting Tang Walla Walla Bing Bang" we received earlier, and that perhaps we should brace for more.

 

 

 

The Filament Whisperer

Posted : 28/05/2021 8:34 pm
ssill2 liked
ssill2
(@ssill2)
Noble Member
RE: Print other Items

@swiss_cheese

lol my bad I didn't make the connection 🙂

Posted : 28/05/2021 8:40 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Print other Items

@hawai

 

BTW, that wasn't wasted on me, I know my Python. just seemed like a great opportunity.  Knowing your a very art minded individual, and working on the project your doing. 

The Filament Whisperer

Posted : 28/05/2021 11:07 pm
Page 3 / 4
Share: