Notifications
Clear all

Mk3s+ Replacement Part GCode or STL  

  RSS
JTOTHEBECK
(@jtothebeck)
New Member
Mk3s+ Replacement Part GCode or STL

I have MK3s+ and would like to reprint the X-ends (both). Can I use the gcode that Prusa offers for the mk3s to + upgrade or would it be better to slice the STL's myself?

Thank you

Posted : 19/01/2021 4:32 pm
Swiss_Cheese
(@swiss_cheese)
Noble Member
RE: Mk3s+ Replacement Part GCode or STL

My opinion, it's always better to slice your own, If your interested in the settings that Prusa used you can load the .gcode and see the settings and make any adjustments you need for your personal printer and filament. that's how I do it.

Good Luck

 

The Filament Whisperer

Posted : 20/01/2021 3:59 am
Cynan
(@cynan)
Estimable Member
RE: Mk3s+ Replacement Part GCode or STL

There shouldn't be any issues using the Gcode either. There are no Gcode changes between the models that I know of.

Posted : 21/01/2021 4:17 pm
Share: