help Printing ABS
i got my printer a week ago built it works awsome printing PLA kinda has a nasty clicking noise acasonally when moving in the X axis thinking its a bad bearing the oil on the rod is black but not why im here >.<
i just started printing in ABS "https://shop.prusa3d.com/en/filament/117-black-easyabs-filament-1kg.html"
i was hoping to print out spare parts with it and on a test print well its not going well and i have no clue to why 🙁
im using the Slic3r Prusa Edition 1.41.3 with "0.20mm quality mk3" and "prusa ABS"
ane help would be nice pic included below
RE: help Printing ABS
Try turning on cooling fan. 20-50%.
if you get weak layer adhesion, bump up temps.
RE: help Printing ABS
ABS has a very annoying warp tendency; my understanding is enclosures are basically a must.
RE: help Printing ABS
Try turning on cooling fan. 20-50%.
if you get weak layer adhesion, bump up temps.
thanks for your help that fixed my issues 🙂