Notifications
Clear all

Create a stop in a print  

  RSS
Jim_Lou
(@jim_lou)
Active Member
Create a stop in a print

Is is possible?  I want to imbed a nut in a print.  I would like the print to stop when it gets to the top of the socket so that I can drop the nut into the socket and then tell the print to continue.

This topic was modified 5 years ago by Jim_Lou
Posted : 18/05/2019 9:44 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Create a stop in a print

Hi Jim, 

try this

G1 X10.000 Y200.000 E0; parking position GET THE PRUSA TO STICK IT'S TONGUE OUT! (edited to revise Y coordinate)
M1; user stop
M105; return to current temp

Insert the code above, at the layer height you want to insert the item at,

the extruder should go to the back left, leaving the build plate almost fully accessible for part insertion...

if the extruder is in the way, change Y200.000 to Y10.000

the print should progress normally to the desired height, then park the head out of the way,

insert your component / components, and them press the button...(if using octoprint, press resume button on octoprint)

and hopefully your print should continue, without having to change filament

As seen on 3D printing nerd! 

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 18/05/2019 11:36 pm
You liked
Jim_Lou
(@jim_lou)
Active Member
Topic starter answered:
RE: Create a stop in a print

Terrific, Joan!  Thanks ever so much!

Posted : 19/05/2019 12:49 am
RetireeJay
(@retireejay)
Reputable Member
RE: Create a stop in a print

I know that most people on this forum don't print directly from their computer over USB.  But for those who do, the Repetier software running on the computer has this pause facility also and it's very convenient.  It's the @pause command, and is equivalent to hitting the "pause" button on the Repetier screen except that when you embed it in your G-code you have precise control over when it's going to happen.  The printhead will move up and out of the way during a Pause.  In fact, if you don't have a MMU, this is an opportunity for you to change filaments if you want (not convenient for complex objects, but good for putting text on an object in a contrasting color.)

To use the @Pause command, the only "hidden trick" is that the "@Pause " requires at least a space after the end of the word Pause.  You can put in a comment after the space that will be shown on screen, but that is optional.

This @Pause command is a function implemented in Repetier running on your computer, not in the firmware running on your printer.

Posted : 19/05/2019 1:26 am
jeff.georgette
(@jeff-georgette)
New Member
RE: Create a stop in a print

@joantabb

Hi Joan,

Isn't M105 = Report temperatures M105: Get Extruder Temperature.

Don't you want Set Bed Temp/ Set Nozzle Temp?

 

Jeff

 

Posted : 22/07/2020 2:22 am
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Create a stop in a print

Hi Jeff,

I have been to sleep since then. 🙂 

You are right...   It's never been mentioned before. and hasn't caused problems before... I was intending to ensure the temperatures were right! before continuing!

regards joan

 

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 22/07/2020 11:57 am
Share: