Notifications
Clear all

ASA Prusament Printing Issues on MK3s  

  RSS
inomad360
(@inomad360)
Active Member
ASA Prusament Printing Issues on MK3s

Just assembled my MKS3, went through many prints with PETG and PLA with no problems. I have just received my Neutral ASA Prusament to try. NFail samplesearly 50% of my prints are failing (pics attached). Some layers not attaching, some shrinking. All PrusaSlicer settings are set to ASA. No issues with PLA or PET.

I am new to 3D printing. Do I need to change any settings to successfully print ASA in slicer?
Posted : 17/06/2020 7:45 pm
dequavis.sends
(@dequavis-sends)
New Member
RE: ASA Prusament Printing Issues on MK3s

I know this is an old post, but were you able to resolve your issues? 

I've been printing random cheap ABS for over a year and the Prusument ASA is by far the worst experience I have had 😕 

Posted : 03/10/2020 3:25 am
cwbullet
(@cwbullet)
Illustrious Member
RE: ASA Prusament Printing Issues on MK3s
Posted by: @mainmail360
I am new to 3D printing. Do I need to change any settings to successfully print ASA in slicer?

You will need to dial in the ASA.  I did not save my settings, but I know it was slightly different.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 03/10/2020 10:54 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: ASA Prusament Printing Issues on MK3s
Posted by: @mainmail360

Just assembled my MKS3, went through many prints with PETG and PLA with no problems. I have just received my Neutral ASA Prusament to try. NFail samplesearly 50% of my prints are failing (pics attached). Some layers not attaching, some shrinking. All PrusaSlicer settings are set to ASA. No issues with PLA or PET.

I am new to 3D printing. Do I need to change any settings to successfully print ASA in slicer?

I print almost exclusively ASA DuraPro with both the Mini and MK3, with and without enclosure. Important are correct temperature settings (approx. 255/100-110), no draught or preferably no fan and brim to reduce warping. This ASA can be printed very well on the textured printing bed.

ASA DuraPro

 
 
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 03/10/2020 11:26 am
ManelTo
(@manelto)
Estimable Member
RE: ASA Prusament Printing Issues on MK3s

I have only tried the ASA from formfutura, perfect with excellent adhesion. I have bought a roll of prusament, but have not tried it yet

Sorry for my poor English. I try to do my best....
Posted : 04/10/2020 6:40 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: ASA Prusament Printing Issues on MK3s

@manelto

Thanks for the tips! The filament is rated positively throughout the net, only the price is slightly higher. I will probably test it.

 
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 04/10/2020 12:18 pm
cwbullet
(@cwbullet)
Illustrious Member
RE: ASA Prusament Printing Issues on MK3s

@manelto

Good filament.   It is in my reviews to write pile.  

--------------------
Chuck H
3D Printer Review Blog...
Posted : 05/10/2020 11:21 am
Share: