PrusaSlicer How to delete a printer present  

  RSS
jochen.h6
(@jochen-h6)
New Member

Hi all. I want to delete a printer preset in PrusaSlicer but cannot figure out how to do. Only see option to add a printer. Any suggestions? Thanks in advance.

This topic was modified 11 months ago by jochen.h6
Posted : 01/07/2019 8:06 pm
joan.t
(@joantabb)
Veteran Member Moderator

Open Prusa slicer, select the configuration wizard,  

then deselect the printers you don't need! 

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 01/07/2019 11:01 pm
gutenbar
(@gutenbar)
Active Member

But how to remove a custom printer?

Posted : 08/04/2020 7:34 pm
joan.t
(@joantabb)
Veteran Member Moderator

@gutenberg-b

in the configuration drop down menu, configuration Snapshot option, look for a snapshot from before you added the custom printer, and activate that! 

however this could come unstuck if you have added any changes that you want to keep, after you added the custom printer that you want to remove

regards joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK...
Posted : 08/04/2020 8:17 pm
Neophyl
(@neophyl)
Noble Member

Go to the printer selection tab, select the printer profile you don’t want and then click the Orange X icon next to the drop down. That will delete the profile. It works for print settings and filament profiles too.

This post was modified 2 months ago 2 times by Neophyl
Posted : 08/04/2020 8:18 pm
gutenbar
(@gutenbar)
Active Member

@neophyl

And the button was there, on my face...
huahuahuahuahuahuahauh

I'm sorry for a so noob question.
Thank you for the help.

Posted : 08/04/2020 8:33 pm
Share:

Please Login or Register