Problem on Z Axis  

  RSS
riomanandhar
(@riomanandhar)
New Member

Hi all.

I have installed 2 moon 0.9 step motors on the Z-axis. My leadscrews have a 2mm pitch. On the calculator, I get 3200 steps per mm.

If I enter M92 z3200 on the firmware, I get huge grinding noises, and the Z-axis doesn't home (Sensor didn't trigger an error). If I enter any value between 1600-2500, I get silence, z homing, but no Z calibration.

What am I doing wrong?

Posted : 13/08/2020 1:57 pm
riomanandhar
(@riomanandhar)
New Member
Posted by: @riomanandhar

Hi all.

I have installed 2 moon 0.9 step motors on the Z-axis. My leadscrews have a 2mm pitch. On the aol mail login calculator, I get 3200 steps per mm. If I enter M92 z3200 on the firmware, I get huge grinding noises, and the Z-axis doesn't home (Sensor didn't trigger an error). If I enter any value between 1600-2500, I get silence, z homing, but no Z calibration.

What am I doing wrong?

Anyone?

Posted : 20/08/2020 4:32 pm
3Delight
(@3delight)
Moderator Moderator

Please don't bump your topics.  If people can help, they will.

Posted : 20/08/2020 4:41 pm
Share:

Please Login or Register