Notifications
Clear all

Printing problems since update 3.7.2  

  RSS
Schehlein
(@schehlein)
Active Member
Printing problems since update 3.7.2

Hey there.

We have some printing issuses since the last update. The surface of my print (especially the edges) are not clean. Please take a look at the picture. Is there anybody with the same problem? Does anybody have a solution?

I have printed the two parts together in the position you can see on the pictures.

I'd be glad to hearing from you!

Greetz, Bernd

Posted : 07/08/2019 10:50 am
--
 --
(@)
Illustrious Member
RE: Printing problems since update 3.7.2

My guess is a problem in the gcode or even in the model, the stl.  Are these something you can zip and post here?

 

Posted : 07/08/2019 7:13 pm
Bunny Science
(@bunny-science)
Noble Member
RE: Printing problems since update 3.7.2

Might not be the firmware.

X and Y positioning appear OK, but extrusion is highly irregular and has troubles with retraction restarts.

Is the Bondtech set screw loose or idler door tension wrong?

Posted : 07/08/2019 7:24 pm
bobstro
(@bobstro)
Illustrious Member
RE: Printing problems since update 3.7.2

I've had some pretty dramatic effects when I sliced with the wrong nozzle size.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 07/08/2019 8:19 pm
--
 --
(@)
Illustrious Member
RE: Printing problems since update 3.7.2

Judging by where the finger cutouts are, and that the inner part has none of the "issues", I'm thinking the part is supposed to be textured and all the messy looking bits are planned by the modeler.

Posted : 07/08/2019 8:40 pm
Share: