Printer stops extruding and the infamous clicking sound can be heard
 
Notifications
Clear all

Printer stops extruding and the infamous clicking sound can be heard  

  RSS
joacim.l
(@joacim-l)
New Member
Printer stops extruding and the infamous clicking sound can be heard

Hi,

I have a problem with my factory assembled mk3s. On most of my prints I get the problem with the clicking noise and no plastic getting through. This happens anywhere from an hour into a print or can be as long as 5 hours before it happens but it always happens.

Any help would be appreciated. I bought an assembled one because I do not like to tinker too much so I hope this can be solved quite easily.

Thanks in advance.

Joacim

Posted : 08/08/2019 8:28 pm
cwbullet
(@cwbullet)
Member
RE: Printer stops extruding and the infamous clicking sound can be heard

You have a partial jam.  Research on Youtube how to do a cold pull.  Then make sure your PTFE tube is all the way in.  

--------------------
Chuck H
3D Printer Review Blog

Posted : 09/08/2019 11:55 pm
Share: