Notifications
Clear all

Oozing  

  RSS
Paxer
(@paxer)
Active Member
Oozing

My printer (an MK3S+) oozes a lot when it is heating up and, when it is doing mesh bed leveling before each print. As a result, blobs of filament get stuck to the the nozzle during mesh bed leveling before each print. This is causing the filament that the printer extrudes to get stuck to the blobs of filament on the nozzle making the blobs even bigger. Any advice? Please let me know.

Posted : 17/06/2021 4:56 pm
Paxer
(@paxer)
Active Member
Topic starter answered:
UPDATE

I have seen some people modify the start gcode to make it so before the print, the nozzle heats up to a lower temperature eg. 160 deg. and then does  mesh bed leveling and then heats up to the full temperature. If you think that I should try this then please say so and provide the gcode for it (I am using the latest version of PrusaSlicer: 2.3.1 and the latest firmware version: 3.10.0).

 

Posted : 17/06/2021 5:13 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Oozing

Chris Warcocki has released a number  'Pretty' profiles with step temperature start!

have a look in the files section on this site https://www.facebook.com/groups/555978714586614

you need to join!

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Posted : 17/06/2021 5:48 pm
bobstro
(@bobstro)
Illustrious Member
RE: Oozing
Posted by: @paxer

My printer (an MK3S+) oozes a lot when it is heating up and, when it is doing mesh bed leveling before each print. As a result, blobs of filament get stuck to the the nozzle during mesh bed leveling before each print. This is causing the filament that the printer extrudes to get stuck to the blobs of filament on the nozzle making the blobs even bigger. Any advice? Please let me know.

Many of us have found that a "2 step" warmup procedure resolves this problem. The basic procedure is:

  1. Warm the nozzle to a "no ooze" temperature (I used 160C). This softens any filament stuck on the nozzle so it doesn't damage the PEI during movement.
  2. Do mesh bed leveling (MBL).
  3. After MBL, home nozzle and heat nozzle to full print temperature.

There are many variations. I've got a documented example here that you might find useful.

FWIW - Prusa has implemented something very similar for the Mini startup gcode, so it's considered a viable approach.

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Posted : 17/06/2021 6:18 pm
John Doe
(@john-doe-5)
Active Member
RE: Oozing

I'm fairly new with all this but I had a similar problem about a month ago.  I solved it by using the (nozzle file?) to clean out any residual filament that formed a minute chunk within the nozzle that was causing the filament to flow out incorrectly and come out at a slight angle which was sticking to the outside of the nozzle.  That or change the nozzle head but I've found changing nozzles is a real hassle.

Posted : 18/06/2021 11:59 am
Share: