MK3s Firmware  

  RSS
JCCBSL
(@jccbsl)
Active Member

I just finished assembling my MK3s kit.  When I look at the firmware revision under the Support Menu, it displays:

Firmware

3.9.0-3421

1_75mm_MK3

Shouldn’t it be displaying 1_75mm_ MK3S ?  Is this a typo or does it have the wrong firmware pre-installed?  I would appreciate it if somebody with an MK3s would check this against their menu.

Posted : 30/06/2020 6:49 pm
karl-herbert
(@karl-herbert)
Illustrious Member
Posted by: @jccbsl

I just finished assembling my MK3s kit.  When I look at the firmware revision under the Support Menu, it displays:

Firmware

3.9.0-3421

1_75mm_MK3

Shouldn’t it be displaying 1_75mm_ MK3S ?  Is this a typo or does it have the wrong firmware pre-installed?  I would appreciate it if somebody with an MK3s would check this against their menu.

This is the newest and right fw for the MK3S (without MMU2S): https://cdn.prusa3d.com/downloads/firmware/prusa3d_fw_3_9_0_MK3S.zip

 

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen....
Posted : 30/06/2020 8:52 pm
Share:

Please Login or Register